红杏入口在线看在线看网页在线看

Use:

Widely used in various types of soft / hard wire (copper wire, enameled wire, tinned wire, copper clad steel, copper and aluminum etc.) and electronic wire stranding, such as power line, telephone line, audio cable, video cable, automotive cable, network cable etc.. A number of single - branch conductors are twisted into one strand to meet the technical requirements of wire rod.

Technical features:

1. The maximum speed of spindle is 3000rpm.

2. Automatic tension control: wire, wire from the bottom up received full line tension to increase, automatically regulate the take-up tension of this function; the whole disc take-up tension is uniform, and the machine can not stop tension.

3. main engine is lubricating oil, natural circulation cooling, effectively prolonging the service life of the spindle bearing.

4. New structure is adopted in the over line system. The wire goes directly from the main shaft to the bow belt, minus the scraping and jumping phenomenon caused by the failure of the steering wheel on the aluminum plate.

There are three tightening devices in the 4. machine to ensure the roundness of the conductor after being twisted and reduce the loss of the insulating material.

5. the whole machine adopts synchronous belt drive, no lubrication points in the machine, clean inside the machine, no oil stain on the strands, and it is suitable for conductor twisting with all kinds of surface cleanliness requirements.

6. adjust the twist distance only need to replace a capstan, adjust the cutter to just flip the reversing lever, simple operation, thereby reducing the error rate and the working intensity of operator. Whole bearings with well-known Japanese brand, with a bow made of new materials, good flexibility and avoid the vibration caused by the jump unit in the high-speed operation, inverter, PLC, magnetic powder clutch, electromagnetic brake, hydraulic jacks and other imported brands, reduce the failure rate and maintenance cost.